![]() Length Fwd: The distance to extrude by.'Normal' means Dir is perpendicular to the plane of the input shape. ![]() 'Edge' means Dir is obtained from an edge (line) linked by Dir Link. Dir Link: parametric link to an edge (line) that sets the direction of extrusion.Otherwise, Dir is read-only, and computed from the linked shape. If Dir Mode is 'Custom', you can edit Dir. Dir: the direction to extend the shape.Base: the input shape (the shape upon which the Part Extrude was applied).La forma de la extrusión está definida por los siguientes parámetros, que pueden ser editados después de su creación en la pestaña de datos. Each input shape is placed underneath its Extrude object. The Model tree will list as many Extrude objects as there were selected shapes. Set the direction and length and optionally other parameters (see the following Parameters section for more details).Īlternatively, the selection can be done after launching the tool, by selecting one or more shape from the list in the Tasks panel.Click on the Part Extrude button in the toolbar, or go to the Part → Extrude menu.Select the shape(s) in the 3D view or in the Model tree view.Extrude a shell of faces, will produce a Compsolid.Extrude a Draft ShapeString, will produce a compound of solids (the string is a compound of the letters which are each a solid).a Draft Wire), will optionally produce a shell (several joined faces) or if the parameter "solid" is "true" will produce a solid a Draft Wire), will produce a open shell (several joined faces) an open ended cylinder) or if the parameter "solid" is "true" will produce a solid (e.g. circle), will optionally produce a closed face (e.g. ![]() line, arc), will produce a open face (e.g. Extrude a Vertex (point), will produce a lineal Edge (Line).In most common scenarios, the following lists the expected output shape type from a given input shape type, El tipo de forma de salida variará dependiendo del tipo de forma de entrada y de las opciones seleccionadas. P.S.Pieza Extruye extiende una forma por una distancia determinada, en una dirección determinada. TypeError: argument 1 must be Part.TopoShape, not Noneīut I have checked.my section is a toposhape. So I have tried to make a macro and this the code I have thought (I know that the result aren't right but I'll adjust it time after time): I have try makePipe again, and it doesn't orient the section always normal to the path, and I like tha it be. So I have thought for solve this problems, ad I think that the macro should check the orientation vector of the wire for each edge, and orienting the section normal to this vector.įor do this I have found somethig like Part.rotate or something like that, but I can't obtain automatically the orietation vector. ![]() the final object is put in the position of the section and not in the position of the path (It wold be good to choose this feature). the section isn't normal to the path, but it rest with the same orientation Selection = ()į("you have to select 2 object, a section and a wire") I create a section (rectangular face) and a wire fro the extrusion along himself, then the code is: ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |